Pacific Terminals Annex 1 and 2 Vacuum System Upgrade

Viterra Pacific Elevators Limited are proposing to upgrade a terminal dust control vacuum system on the north east corner of the Annex 1 roof, located at 1803 Stewart Street, Vancouver. A primary separator unit will be installed above a storage bin to collect recovered material, which will subsequently be processed in the terminal reclaim system for recovery of valuable grain. A secondary separator, filtering the finer particles, will discharge into a bin that will feed into the existing dust transportation system. The new equipment will have a footprint of approximately 60 square metres combined. The secondary separator will be 4 metres high and will be external to Annex 1. The new equipment will be shielded by a partial acoustic barrier to minimize noise impacts. The construction period is anticipated to run for three to four months with targeted completion at the end of June 2021.

Latest update

Notice of Determination

1803 Stewart Street, Vancouver, B.C. – February 11, 2021 – The Vancouver Fraser Port Authority has determined that the proposed Pacific Terminals Annex 1 and 2 Vacuum System Upgrade is not likely to cause significant adverse environmental effects..



Project and Environmental Review
Vancouver Fraser Port Authority
100 The Pointe, 999 Canada Place
Vancouver, British Columbia V6C 3T4

  • Location

    • Pacific Terminals Annex 1 and 2 Vacuum System Upgrade (British Columbia)
  • Nature of Activity

    • Ports and Harbours
    • Other, not otherwise specified
  • Assessment Status

  • Start Date

  • Proponent

    Viterra Pacific Elevators Limited
  • Authorities

    • Vancouver Fraser Port Authority
  • Assessment Type

    Project on federal lands
  • Reference Number


This map is for illustrative purposes. The markers represent the approximate locations based on available data. More than one marker may be identified for a given assessment.


Nearby assessments

...within 200 kilometres
Date modified: